[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Problems getting FreeNet6's tunnel working
- Subject: Problems getting FreeNet6's tunnel working
- From: Ben Lovett <[email protected]> (''Ben Lovett ' ')
- Date: Thu, 2 Nov 2000 07:19:13 -0800
- In-reply-to: <D12454EA90EED2118F9E0008C7B9A5D601426918@TNS04>; from [email protected] on Thu, Nov 02, 2000 at 09:57:37AM -0500
- References: <D12454EA90EED2118F9E0008C7B9A5D601426918@TNS04>
Brown, James ([email protected]) wrote:
One of us thinks the other is talking about something completly
different. tun0 is my PPP connection.. When I dial into my ISP, i use
the tun0 interface to get my IPv4 connection. When I run the perl
script provided by Freenet6, the only thing it should be doing is
assigning the gif0 interface my PPP IP, and then my IPv6 tunnel
endpoint. I do have a static IP on my PPP connection.
Maybe, now that I have tried to clear this up a little, we can get
somewhere. Sorry if this is getting a bit tedious ;)
-Ben
*snip*
> Yes- but the endpoint of the tunnel has to be on the *same box*
> you are wanting to run IPv6 because the endpoint will strip
> off the IPv4 header. If the v4 header is stripped off
> at your gateway and not the host, the IPv6 packet has nowhere
> to go.
>
> (Use fixed width font to view below.)
>
>
> +
> |
> YOU + FreeNet
> |
> +
>
> gif0 ------------------ Freetunnel0
> 192.145.217.55/24 196.27.56.10/24
> xl0 ethernet0
> 3ffe:a:b:c::1 prefixlen 127 3ffe:a:b:c::2 prefixlen 127