[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Sunsol8

> This time I want to try to communicate with two IPv6 hosts
> with two IPv4 cisco routers inbetween.
> 
> This is the second type of tunnel we want to experiment with.
> Does anyone have some pointers.
> Sorry but the documentation is too dificult to understand.
> Call me a dummy. (I don't care)
> I like interacting with people.
> 
It is exactly the same 'type of tunnel' as the first setup.
This time, you have boxA46 | routerA4 | routerB4 | boxB46

Assuming your routers speak only IPv4, and they can route traffic
from boxA to boxB, you can set up a tunnel between the two
solaris machines.

Let us say boxA is IPv4 address 10.0.1.2 and boxB is 10.0.2.2

On boxA, you would create /etc/hostname6.ip.tun0 with contents:
-- 
tsrc 10.0.1.2 tdst 10.0.2.2 up
addif 3ffe:8114:3000::0 3ffe:8114:3000::1 up
--

and on boxB, /etc/hostname6.ip.tun0 becomes:
-- 
tsrc 10.0.2.2 tdst 10.0.1.2 up
addif 3ffe:8114:3000::1 3ffe:8114:3000::0 up
--

You can then ping6 the other endpoint (ping6 is not standard
software for Solaris, but ping works in both address families)

happy pinging :)
Pim

> The cisco configuration is still available, just ask
> 
> Thanks
> Greetings
> Mithrandir.
> 
> 


-- 
---------- - -    - - -+- - -    - - ----------
Pim van Pelt                 Email: [email protected]
http://www.ipng.nl/             IPv6 Deployment
-----------------------------------------------