[ale] PCI devices

[mshade at threekay.com (Matt Shade)]

Here's a little more info:
- I CAN ping my own ip address, but any other 
address just times out
??
- it appears that the BIOS is assigning IRQ 0 to 
the card, and I can't find anyway to change that:
?????????? 
"ne2k-pci.c:vpre-1.00e 5/27/99 D. Becker/P. Gortmaker <A 
href="http://cesdis.gsfc.nasa.gov/linux/drivers/ne2k-pci.html";>http://cesdis.gsfc.nasa.gov/linux/drivers/ne2k-pci.html???????????? 
WARNING: The PCI BIOS assigned this PCI NE2k card to IRQ 0, which is unlikely to 
work!.???????????? You should use the PCI BIOS setup 
to assign a valid IRQ line.?????????? ne2k-pci.c: PCI 
NE2000 clone 'RealTek RTL-8029' at I/O 0x1020, IRQ 
0.?????????? eth0: RealTek RTL-8029 found at 0x1020, IRQ 
0, 00:40:05:5D:DC:60."
??
- more dmesg snips that may help:
??
???????????? PCI: PCI BIOS 
revision 2.10 entry at 0xfd9be, last 
bus=1???????????? PCI: Using configuration type 
1???????????? PCI: Probing PCI 
hardware???????????? PCI: Enabling I/O for device 
00:50???????????? PCI: Enabling I/O for device 
00:58???????????? PCI: Enabling memory for device 
00:59???????????? PCI: Enabling memory for device 
00:5a
.......
???????????? SIS5513: IDE 
controller on PCI bus 00 dev 01???????????? SIS5513: 
chipset revision 208???????????? SIS5513: not 100% 
native mode: will probe irqs later???????????? 
?????? ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:DMA, 
hdb:pio???????????? ?????? ide1: BM-DMA 
at 0x1008-0x100f, BIOS settings: hdc:DMA, 
hdd:pio???????????? hda: QUANTUM FIREBALLlct10 15, 
ATA DISK drive???????????? hdc: Hewlett-Packard 
CD-Writer Plus 8000, ATAPI CDROM drive???????????? 
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14???????????? ide1 
at 0x170-0x177,0x376 on irq 15
??
Guess I'm just not understanding why Win98 sees the 
card with IRQ 5 and linux sees it at 0. And I still don't even see the modem or 
audio device.
??
??
??
<BLOCKQUOTE 
style="BORDER-LEFT: #000000 2px solid; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px; PADDING-LEFT: 5px; PADDING-RIGHT: 0px">
  ----- Original Message ----- 
  <DIV 
  style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black">From: 
  Matt Shade 
  
  To: <A href="mailto:ale at ale.org" 
  title=ale at ale.org>ale at ale.org 
  Sent: Friday, December 08, 2000 
  13:13
  Subject: [ale] PCI devices
  
  Hi,
  ??
  Starting the archive search now, but thought I'd 
  ask on here in the meantime. 
  I have an HP Pavilion with the SiS5513 PCI bus. 
  Can't install NT on it, and I Hate Win98 (yes, with at capital "H"). But I 
  have some apps for work that HAVE to run on Windows, so I'm keeping it dual 
  boot for the time being til I can test VMWare or something else.
  ??
  Anyway, there's a NE2000 clone and a 56k 
  plug'n'play modem, and the audio device comes off the PCI bus. I rebuilt the 
  kernel to make sure these devices were enabled, but I can't seem to see the 
  modem or the audio device. The network card shows up, but then fails 
  with:
  ?????? SIOCSIFFLAGS: Resource 
  Temporarily Unavailable
  ??
  I've added an append "ether=" line in lilo, but 
  no effect.
  ??
  Boot up in windows to get the IRQs and IO 
  addresses:
  net card:?? 5?? 1020-103F
  modem:???? ??? 03e8-03ef???? 
  (doesn't give an IRQ used)
  audio:???????? 
  10??1040-107f
  ??
  I'm sure there's a simple explanation, but I've 
  been away from installing linux for a while, so it'll probably take me a while 
  to find it.
  ??
  Any guidance is appreciated,
  Matt
  ??
  Oh yeah, this is with SuSE Linux 7.0, I believe 
  the kernal is 2.2.16