[no subject]

>Just updated from Mandrake Official 10 to 10.1 and now K3b no longer
>works with my CD burner. 
>
>K3b displays the following when attempting to burn an ISO image:
>
>Using cdrecord 2.1-dvd - Copyright (C) 1995-2004 Jorg Schilling
>Starting tao writing at 52x speed...
>cdrecord returned an unknown error (code 255).
>Unknown error 255
>Please send me an email with the last output.
>
>Selecting the Show Debugging Output button displays the following:
>
>System
>-----------------------
>K3b Version:0.11.16 
>KDE Version: 3.2.3
>QT Version: 3.3.3
>
>cdrecord
>-----------------------
>scsidev: '/dev/ide/host0/bus1/target0/lun0/cd'
>devname: '/dev/ide/host0/bus1/target0/lun0/cd'
>scsibus: -2 target: -2 lun: -2
>Warning: Open by 'devname' is unintentional and not supported.
>Linux sg driver version: 3.5.27
>/usr/bin/cdrecord: Warning: using inofficial libscg transport code
>version (warly-Mandrakelinux-scsi-linux-sg '@(#)scsi-linux-sg.c 1.83
>04/05/20 Copyright 1997 J. Schilling').
>SCSI buffer size: 64512
>/usr/bin/cdrecord: Warning: controller returns wrong size for CD
>capabilities page.
>/usr/bin/cdrecord: Warning: controller returns wrong size for CD
>capabilities page.
>/usr/bin/cdrecord: Warning: controller returns wrong size for CD
>capabilities page.
>/usr/bin/cdrecord: Sorry, no CD/DVD-Recorder or unsupported
>CD/DVD-Recorder found on this target.
>/usr/bin/cdrecord: Warning: controller returns wrong size for CD
>capabilities page.
>/usr/bin/cdrecord: Drive does not support TAO recording.
>/usr/bin/cdrecord: Illegal write mode for this drive.
>Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 J?rg
>Schilling
>Note: This version is an unofficial (modified) version with DVD support
>Note: and therefore may have bugs that are not present in the original.
>Note: Please send bug reports or support requests to
><warly at mandrakesoft.com>.
>Note: The author of cdrecord should not be bothered with problems in
>this version.
>TOC Type: 1 = CD-ROM
>Using libscg version 'schily-0.8'.
>Driveropts: 'burnfree'
>atapi: 1
>Device type    : Removable CD-ROM
>Version        : 0
>Response Format: 2
>Capabilities   : 
>Vendor_info    : 'Memorex '
>Identifikation : '52MAX 325216AJ  '
>Revision       : 'NWK1'
>Device seems to be: Generic CD-ROM.
>Using generic SCSI-2       CD-ROM driver (scsi2_cd).
>Driver flags   : 
>Supported modes: 
>FIFO size      : 4194304 = 4096 KB
>
>cdrecord comand:
>-----------------------
>/usr/bin/cdrecord -v gracetime=2 dev=/dev/ide/host0/bus1/target0/lun0/cd
>speed=52 -tao driveropts=burnfree -eject -data /data/iso/TOCD2.iso 
>
>
>This all worked just fine with 10.0  Any help would be greatly
>appreciated.  As now my only working burner is a 4x SCSI burner on my
>SuSE box.
>
>  
>
What kernel version does 10.1 come with?
If it's 2.6.8, there are known problems with burning cd/dvd.

Calvin...


</pre>
<!--X-Body-of-Message-End-->
<!--X-MsgBody-End-->
<!--X-Follow-Ups-->
<hr>
<ul><li><strong>Follow-Ups</strong>:
<ul>
<li><strong><a name="00885" href="msg00885.html">[ale] Mandrake 10.1 Official &amp; K3b</a></strong>
<ul><li><em>From:</em> esoteric at 3times25.net (Geoffrey)</li></ul></li>
</ul></li></ul>
<!--X-Follow-Ups-End-->
<!--X-References-->
<ul><li><strong>References</strong>:
<ul>
<li><strong><a name="00877" href="msg00877.html">[ale] Mandrake 10.1 Official &amp; K3b</a></strong>
<ul><li><em>From:</em> audilover at speedfactory.net (Raylynn Knight)</li></ul></li>
</ul></li></ul>
<!--X-References-End-->
<!--X-BotPNI-->
<ul>
<li>Prev by Date:
<strong><a href="msg00878.html">[ale] Question : Printer with lowest TCO for infrequent usage</a></strong>
</li>
<li>Next by Date:
<strong><a href="msg00880.html">[ale] Question : Printer with lowest TCO for infrequent usage</a></strong>
</li>
<li>Previous by thread:
<strong><a href="msg00877.html">[ale] Mandrake 10.1 Official &amp; K3b</a></strong>
</li>
<li>Next by thread:
<strong><a href="msg00885.html">[ale] Mandrake 10.1 Official &amp; K3b</a></strong>
</li>
<li>Index(es):
<ul>
<li><a href="maillist.html#00879"><strong>Date</strong></a></li>
<li><a href="threads.html#00879"><strong>Thread</strong></a></li>
</ul>
</li>
</ul>

<!--X-BotPNI-End-->
<!--X-User-Footer-->
<!--X-User-Footer-End-->
</body>
</html>