[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[no subject]



Feb 29 20:05:31 shosta md0: max total readahead window set to 508k
Feb 29 20:05:31 shosta md0: 1 data-disks, max readahead per data-disk: 
508k
Feb 29 20:05:31 shosta raid1: device ide/host2/bus1/target0/lun0/part1 
operational as mirror 1
Feb 29 20:05:31 shosta raid1: device ide/host2/bus0/target0/lun0/part1 
operational as mirror 0
Feb 29 20:05:31 shosta raid1: raid set md0 not clean; reconstructing 
mirrors
Feb 29 20:05:31 shosta raid1: raid set md0 active with 2 out of 2 
mirrors
Feb 29 20:05:31 shosta md: updating md0 RAID superblock on device
Feb 29 20:05:31 shosta md: ide/host2/bus1/target0/lun0/part1 [events: 
00000001]<6>(write) ide/host2/bus1/target0/lun0/part1's sb offset: 
78148096
Feb 29 20:05:31 shosta md: ide/host2/bus0/target0/lun0/part1 [events: 
00000001]<6>(write) ide/host2/bus0/target0/lun0/part1's sb offset: 
78150592
Feb 29 20:05:31 shosta md: syncing RAID array md0
Feb 29 20:05:31 shosta md: minimum _guaranteed_ reconstruction speed: 
100 KB/sec/disc.
Feb 29 20:05:31 shosta md: using maximum available idle IO bandwith 
(but not more than 100000 KB/sec) for reconstruction.
Feb 29 20:05:31 shosta md: using 508k window, over a total of 78148096 
blocks.
Feb 29 20:05:57 shosta hde: dma_intr: status=0x51 { DriveReady 
SeekComplete Error }
Feb 29 20:05:57 shosta hde: dma_intr: error=0x40 { UncorrectableError 
}, LBAsect=1139948, sector=1139840
Feb 29 20:05:57 shosta end_request: I/O error, dev 21:01 (hde), sector 
1139840
Feb 29 20:05:57 shosta raid1: Disk failure on 
ide/host2/bus0/target0/lun0/part1, disabling device.
Feb 29 20:05:57 shosta  Operation continuing on 1 devices
Feb 29 20:05:57 shosta raid1: mirror resync was not fully finished, 
restarting next time.
Feb 29 20:05:57 shosta md: updating md0 RAID superblock on device
Feb 29 20:05:57 shosta md: ide/host2/bus1/target0/lun0/part1 [events: 
00000002]<6>(write) ide/host2/bus1/target0/lun0/part1's sb offset: 
78148096
Feb 29 20:05:57 shosta md: recovery thread got woken up ...
Feb 29 20:05:57 shosta md0: no spare disk to reconstruct array! -- 
continuing in degraded mode
Feb 29 20:05:57 shosta md: recovery thread finished ...
Feb 29 20:05:57 shosta md: (skipping faulty 
ide/host2/bus0/target0/lun0/part1 )
Feb 29 20:06:01 shosta hde: dma_intr: status=0x51 { DriveReady 
SeekComplete Error }
Feb 29 20:06:01 shosta hde: dma_intr: error=0x40 { UncorrectableError 
}, LBAsect=1139948, sector=1139848
Feb 29 20:06:01 shosta end_request: I/O error, dev 21:01 (hde), sector 
1139848
Feb 29 20:06:05 shosta hde: dma_intr: status=0x51 { DriveReady 
SeekComplete Error }
Feb 29 20:06:05 shosta hde: dma_intr: error=0x40 { UncorrectableError 
}, LBAsect=1139948, sector=1139856
Feb 29 20:06:05 shosta end_request: I/O error, dev 21:01 (hde), sector 
1139856
Feb 29 20:06:25 shosta hde: dma_timer_expiry: dma status == 0x21
Feb 29 20:06:35 shosta hde: error waiting for DMA
Feb 29 20:06:35 shosta hde: dma timeout retry: status=0x51 { DriveReady 
SeekComplete Error }
Feb 29 20:06:35 shosta hde: dma timeout retry: error=0x40 { 
UncorrectableError }, LBAsect=1139948, sector=1139864
Feb 29 20:06:35 shosta end_request: I/O error, dev 21:01 (hde), sector 
1139864
Feb 29 20:06:45 shosta hde: irq timeout: status=0xd0 { Busy }
Feb 29 20:06:45 shosta
Feb 29 20:06:45 shosta PDC202XX: Primary channel reset.
Feb 29 20:06:45 shosta ide2: reset: success

The ide2: reset is what is most likely causing the hard lockup, but I 
have no idea what to do to fix this.  I have tried multiple drives and 
different ribbon cables, and no luck.  Has anyone else seen this?

Jason


</pre>
<!--X-Body-of-Message-End-->
<!--X-MsgBody-End-->
<!--X-Follow-Ups-->
<hr>
<ul><li><strong>Follow-Ups</strong>:
<ul>
<li><strong><a name="01133" href="msg01133.html">[ale] Software RAID Problems</a></strong>
<ul><li><em>From:</em> runman at speedfactory.net (Greg)</li></ul></li>
</ul></li></ul>
<!--X-Follow-Ups-End-->
<!--X-References-->
<!--X-References-End-->
<!--X-BotPNI-->
<ul>
<li>Prev by Date:
<strong><a href="msg01131.html">[ale] Wireless access and WEP</a></strong>
</li>
<li>Next by Date:
<strong><a href="msg01133.html">[ale] Software RAID Problems</a></strong>
</li>
<li>Previous by thread:
<strong><a href="msg01131.html">[ale] Wireless access and WEP</a></strong>
</li>
<li>Next by thread:
<strong><a href="msg01133.html">[ale] Software RAID Problems</a></strong>
</li>
<li>Index(es):
<ul>
<li><a href="maillist.html#01132"><strong>Date</strong></a></li>
<li><a href="threads.html#01132"><strong>Thread</strong></a></li>
</ul>
</li>
</ul>

<!--X-BotPNI-End-->
<!--X-User-Footer-->
<!--X-User-Footer-End-->
</body>
</html>