[no subject]

Yup.

{0}:/usr/src/kernel/qc-usb-0.6.0>lsmod
Module                  Size  Used by
quickcam               65180  0 
8250                   21216  0 
serial_core            23488  1 8250
snd_emu10k1            95620  1 


I also tried with the pwc module.  No go.

This struck me as odd though.

drivers/usb/core/usb.c: registered new driver quickcam
request_module: failed /sbin/modprobe -- char-major-81-0. error = 256

I did a "rm -f /dev/video /dev/video0 /dev/video1" and re-installed the
module and found this in dmesg:

drivers/usb/core/usb.c: deregistering driver quickcam
drivers/usb/core/usb.c: registered new driver quickcam

Also:

root at spirit
{0}:/usr/src/kernel/qc-usb-0.6.0>xawtv --hwscan
This is xawtv-3.90, running on Linux/i686 (2.6.1-bk4)
can't open /dev/video0: No such device
v4l-conf had some trouble, trying to continue anyway
v4l2: open /dev/video0: No such device
v4l2: open /dev/video0: No such device
v4l: open /dev/video0: No such device
no video grabber device available

{1}:/usr/src/kernel/qc-usb-0.6.0>v4l-conf 
v4l-conf: using X11 display :0.0
dga: version 2.0
mode: 1280x960, depth=16, bpp=16, bpl=2560, base=0xd8000000
can't open /dev/video0: No such device


root at spirit
{1}:/usr/src/kernel/qc-usb-0.6.0>ls -la /dev/video
lrwxr-xr-x    1 root     root           11 Jan 18 21:32 /dev/video ->
/dev/video0

root at spirit
{0}:/usr/src/kernel/qc-usb-0.6.0>ls -la /dev/video0
crw-rw-rw-    1 root     root      81,   0 Jan 18 21:31 /dev/video0

root at spirit
{0}:/usr/src/kernel/qc-usb-0.6.0>ls -la /dev/video1
crw-r--r--    1 root     root      81,   1 Jan 18 21:31 /dev/video1







Thus spake Geoffrey (esoteric at 3times25.net):

> Robert L. Harris wrote:
> >
> >hmmm:
> >
> >{127}:/usr/src/kernel/linux-2.6.1>xawtv -hwscan
> >This is xawtv-3.90, running on Linux/i686 (2.6.1-bk4)
> >looking for available devices
> >port 53-53
> >    type : Xvideo, image scaler
> >    name : NV Video Overlay
> >
> >That's it. :<
> >
> >Ugh, I just unplugged the cam all together and reran the above command,
> >same output :<
> 
> Did you insmod the pwc module first?  The device will show up when the 
> proper driver is loaded.  Mine doesn't show up with the pwc driver but 
> it does with the mod_quickcam module.
> 
> Also, the usb subsystem should report something when you plug that puppy 
> in.  Plug it in then dmesg, see what you get.
> 
> Did you check out the sourceforge site?
> 
> -- 
> Until later, Geoffrey	esoteric at 3times25.net
> 
> Building secure systems inspite of Microsoft
> 
> _______________________________________________
> Ale mailing list
> Ale at ale.org
&gt; <a  rel="nofollow" href="http://www.ale.org/mailman/listinfo/ale";>http://www.ale.org/mailman/listinfo/ale</a>

:wq!
---------------------------------------------------------------------------
Robert L. Harris                     | GPG Key ID: E344DA3B
                                         @ x-hkp://pgp.mit.edu
DISCLAIMER:
      These are MY OPINIONS ALONE.  I speak for no-one else.

Life is not a destination, it's a journey.
  Microsoft produces 15 car pileups on the highway.
    Don't stop traffic to stand and gawk at the tragedy.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: Digital signature



</pre>
<!--X-Body-of-Message-End-->
<!--X-MsgBody-End-->
<!--X-Follow-Ups-->
<hr>
<ul><li><strong>Follow-Ups</strong>:
<ul>
<li><strong><a name="00736" href="msg00736.html">[ale] Logitec USB Quickcam questions?</a></strong>
<ul><li><em>From:</em> esoteric at 3times25.net (Geoffrey)</li></ul></li>
</ul></li></ul>
<!--X-Follow-Ups-End-->
<!--X-References-->
<ul><li><strong>References</strong>:
<ul>
<li><strong><a name="00698" href="msg00698.html">[ale] Logitec USB Quickcam questions?</a></strong>
<ul><li><em>From:</em> ups at stups.com (Stephan Uphoff)</li></ul></li>
<li><strong><a name="00700" href="msg00700.html">[ale] Logitec USB Quickcam questions?</a></strong>
<ul><li><em>From:</em> esoteric at 3times25.net (Geoffrey)</li></ul></li>
<li><strong><a name="00712" href="msg00712.html">[ale] Logitec USB Quickcam questions?</a></strong>
<ul><li><em>From:</em> Robert.L.Harris at rdlg.net (Robert L. Harris)</li></ul></li>
<li><strong><a name="00713" href="msg00713.html">[ale] Logitec USB Quickcam questions?</a></strong>
<ul><li><em>From:</em> esoteric at 3times25.net (Geoffrey)</li></ul></li>
</ul></li></ul>
<!--X-References-End-->
<!--X-BotPNI-->
<ul>
<li>Prev by Date:
<strong><a href="msg00729.html">[ale] X servers other than Xfree</a></strong>
</li>
<li>Next by Date:
<strong><a href="msg00731.html">[ale] Gimp Tricks [OT]</a></strong>
</li>
<li>Previous by thread:
<strong><a href="msg00713.html">[ale] Logitec USB Quickcam questions?</a></strong>
</li>
<li>Next by thread:
<strong><a href="msg00736.html">[ale] Logitec USB Quickcam questions?</a></strong>
</li>
<li>Index(es):
<ul>
<li><a href="maillist.html#00730"><strong>Date</strong></a></li>
<li><a href="threads.html#00730"><strong>Thread</strong></a></li>
</ul>
</li>
</ul>

<!--X-BotPNI-End-->
<!--X-User-Footer-->
<!--X-User-Footer-End-->
</body>
</html>