[ale] On switch for MB

[johnmills at speakeasy.net (John Mills)]

Craig -

Just a guess from what you said (I assume a "nekkid" MB on a power-supply 
cable), but I would try a n.o. pushbutton at the end on a twisted pigtail 
from a 2-pin plug, cut (wires and all) from an old PC cabinet. I expect 
a short push activates the MB, a long one turns it off. If you really want 
to be fancy you can mount it on a scrap of metal or small plastic 
container.

I bet Frys does have pushbutton switches, else try Radio Shack. (Maybe a 
doorbell button from Ace Hardware would be more in the spirit of things - 
just don't use the lighted kind. &8-)

Frys may have connectors to plug onto a 2-point 0.1" MB header, but 
salvage is probably an easier approach. Naturally you could wire-wrap on 
the pins, then solder if its a permanent setup.

  - Mills

On Mon, 8 Nov 2010, Craig Button wrote:

> I need a simple on swith for a motherboard.  Neither Fry's or Microcenter
> has one in stock.  Any suggestions?