Cable Operator List

[colton.conor at gmail.com (Colton Conor)]

Frank,

Thanks for the advice, but I am looking for a low density, low cost
solution.

I have found some G.HN briges that are made from MDU enviroments, and seem
cheaper than a small CMTS system. Anyone have expierence with G.HN?

On Tue, Feb 2, 2016 at 11:07 PM, <frnkblk at iname.com> wrote:

> If you need density along the Arris line, skip the C4 and go straight to
> the E6000.
>
> Frank
>
> -----Original Message-----
> From: NANOG [mailto:nanog-bounces at nanog.org] On Behalf Of Daniel Corbe
> Sent: Tuesday, February 02, 2016 8:18 AM
> To: Colton Conor <colton.conor at gmail.com>
> Cc: NANOG <nanog at nanog.org>
> Subject: Re: Cable Operator List
>
> Hey Colton,
>
> We?re using small 16 channel CMTS systems for residential MDUs and
> colocating them directly on premise inside of wiring closets and then
> connecting them by metro ethernet.  We?ve had great successes so far with
> this model.
>
> There?s lots of CMTS vendors.
>
> There?s tons of used Motorola BSR 64Ks on the market, but be aware of the
> lack of useful IPv6 features (like prefix delegation) in older software
> releases.  If you buy a box and want to run 7.x or 8.x, you?ll need to
> relicense your downstream and upstream channels at some additional
> arbitrary fixed cost.
>
> I?m personally fond of these things:
>
> http://picodigital.com/product-details.php?ID=miniCMTS200a
>
> You can only bond 16 channels together max though because that?s all the
> box supports and you can?t bond across boxes; however, these things are
> less than 4 grand if you buy them in bulk so they?re really fucking easy to
> just spam everywhere.
>
> Blonder Tongue makes a pizza-box style CMTS too:
>
>
> http://www.blondertongue.com/shop-by-department/catv/ip-over-coax/docsis/euro-docsis/
>
> As does Harmonics:
>
> http://harmonicinc.com/product/cable-edge/nsg-exo
>
> All three are based on the same chipset, so the real differentiation is
> price and firmware features.
>
> Then there?s Cisco.
>
> The UBR is a popular platform.  And pretty soon there?s going to be a glut
> of UBR10Ks on the Market because Comcast is busy ripping their UBRs out of
> production because they?re upgrading their cable plant to the CBR platform.
>
> Then the Arris C4, if you have deep pockets, is a modern version of the
> BSR:
>
> http://www.arris.com/products/c4-cmts/
>
>
> > On Feb 2, 2016, at 9:00 AM, Colton Conor <colton.conor at gmail.com> wrote:
> >
> > Well, maybe NANOG's not a bad place for this post then! I would like to
> know more about the data-only side of CMTS systems, and who the main
> vendors are.
> >
> > We have MDU properties where there is either old inside CAT3 phone wire,
> or coaxial cable. We have looked and are very familiar with the multiple
> technologies that work over phone lines namely VDSL2 and G.FAST. However,
> using the coaxial cable seems to be a much better solution than using the
> phone wires.
> >
> > So I am looking for compacts, low cost CMTS systems. Based on the specs,
> I am looking for something at least DOCSIS 3.0 capable, with at least 16X4
> output. Something with the ability to upgrade to software upgrade to DOCSIS
> 3.1 would be nice, but I doubt that would be a low cost solution.
> >
> > Whats out there for small operators that don't want a large chassis
> based system to feed an entire town with.
> >
> > So far I have found the
> http://picodigital.com/product-details.php?ID=miniCMTS200a which seems to
> retail for under $5000.
> >
> >
> > On Tue, Feb 2, 2016 at 7:48 AM, Daniel Corbe <dcorbe at hammerfiber.com>
> wrote:
> >
> > > On Feb 2, 2016, at 8:42 AM, Colton Conor <colton.conor at gmail.com>
> wrote:
> > >
> > > Are there any mailing lists out there dedicated for cable/MSO type
> > > operators?
> > >
> >
> > I'm curious about this too.
> >
> > I?m not a cable operator (in that I haven?t successfully registered for
> a cable franchise yet) but I do operate a docsis network and I?ve
> successfully negotiated the treacherous waters of obtaining and providing
> content to my users.
> >
> > I?m still a bit green behind the ears but I could probably offer some
> measure of assistance if you have a specific question.
> >
> > -Daniel
> >
> >
>
>
>
>