[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
rack rails
>
>
>
I have considered making my own rails using a laser cutting service. I have
done this before where I created 500 mm to 19 inch rack adapters and had
them laser cut at lasergist.com. Fairly simple really, just make a drawing
in Fusion360 and upload the drawing. A few days later the adapters arrived.
Rails would probably require some metal bending but could otherwise be made
the same way. Maybe we could do an open source design here?
Regards
Baldur
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.nanog.org/pipermail/nanog/attachments/20200330/02232281/attachment.html>
- Follow-Ups:
- rack rails
- From: karsten.elfenbein at gmail.com (Karsten Elfenbein)
- References:
- rack rails
- From: dfund at globalvision.net (David Funderburk)
- rack rails
- From: tore at fud.no (Tore Anderson)
- rack rails
- From: lguillory at reservetele.com (Luke Guillory)
- rack rails
- From: tore at fud.no (Tore Anderson)
- rack rails
- From: lguillory at reservetele.com (Luke Guillory)